Testing Writing

Those pages, intended to explain some configurations of pfSense®

Netgate™

System -> Cert Manager

Field:: valore

Last update mercoledì 02 novembre, 2022

Last update Nov 02, 2022

Premere il pulsante per aggiungere

<html>
  <body>
    <p> Abeeb !!!</p>
  </body>
</html>

Let’s test wrapping and whitespace significance in inline literals: This is an example of --inline-literal --text, --including some-- strangely--hyphenated-words. Adjust-the-width-of-your-browser-window to see how the text is wrapped. -- ---- -------- Now note the spacing between the words of this sentence (words should be grouped in pairs).

My ‣ Software ‣ Some menu ‣ Some sub menu 1 ‣ sub menu 2.

my → Software → Some Menu → Some sub menu 1.

Block Quotes

Block quotes consist of indented body elements:

My theory by A. Elk. Brackets Miss, brackets. This theory goes as follows and begins now. All brontosauruses are thin at one end, much much thicker in the middle and then thin again at the far end. That is my theory, it is mine, and belongs to me and I own it, and what it is too.

—Anne Elk (Miss)

Take it away, Eric the Orchestra Leader!

A one, two, a one two three four

Half a bee, philosophically,

must, ipso facto, half not be.

But half the bee has got to be,

vis a vis its entity. D’you see?

But can a bee be said to be

or not to be an entire bee,

when half the bee is not a bee,

due to some ancient injury?

Singing…

Title
Heading row 1, column 1	Heading row 1, column 2	Heading row 1, column 3	Heading row 1, column 4
Row 1, column 1		Row 1, column 3	Row 1, column 4
Row 2, column 1	Row 2, column 2	Row 2, column 3	Row 1, column 4

OneOS

#!/bin/sh

# Da https://download.bareos.org/bareos/release/

Step 1.
1. Step a.
2. Step b.
Step 2.

non ordinata

Item 1.
Item 2.
Item 3.
- Item 3.5

Fisical Diagram

Console interface IP - Primary Node

FreeBSD/amd64 (pfSense.home.arpa) (ttyu0)

pfSense - Netgate Device ID: 98f0e53206c36b104aff

*** Welcome to pfSense 2.6.0-RELEASE (amd64) on pfSense ***

 WAN (wan)       -> igb0       -> 
 LAN (lan)       -> igb1       -> v4: 192.168.1.1/24

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Enable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 2

Available interfaces:

1 - WAN (igb0 - dhcp, dhcp6)
2 - LAN (igb1 - static)

Enter the number of the interface you wish to configure: 1

Configure IPv4 address WAN interface via DHCP? (y/n) n

Enter the new WAN IPv4 address.  Press <ENTER> for none:
> 203.0.113.253

Subnet masks are entered as bit counts (as in CIDR notation) in pfSense.
e.g. 255.255.255.0 = 24
     255.255.0.0   = 16
     255.0.0.0     = 8

Enter the new WAN IPv4 subnet bit count (1 to 32):
> 29

For a WAN, enter the new WAN IPv4 upstream gateway address.
For a LAN, press <ENTER> for none:
> 203.0.113.249

Configure IPv6 address WAN interface via DHCP6? (y/n) n

Enter the new WAN IPv6 address.  Press <ENTER> for none:
> 
Disabling IPv4 DHCPD...
Disabling IPv6 DHCPD...

Do you want to revert to HTTP as the webConfigurator protocol? (y/n) n

Please wait while the changes are saved to WAN...
 Reloading filter...
 Reloading routing configuration...
 DHCPD...

The IPv4 WAN address has been set to 203.0.113.253/29

Press <ENTER> to continue.
pfSense - Netgate Device ID: 98f0e53206c36b104aff

*** Welcome to pfSense 2.6.0-RELEASE (amd64) on pfSense ***

 WAN (wan)       -> igb0       -> v4: 203.0.113.253/29
 LAN (lan)       -> igb1       -> v4: 192.168.1.1/24

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Enable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 2

Available interfaces:

1 - WAN (igb0 - static)
2 - LAN (igb1 - static)

Enter the number of the interface you wish to configure: 2

Enter the new LAN IPv4 address.  Press <ENTER> for none:
> 172.18.0.253

Subnet masks are entered as bit counts (as in CIDR notation) in pfSense.
e.g. 255.255.255.0 = 24
     255.255.0.0   = 16
     255.0.0.0     = 8

Enter the new LAN IPv4 subnet bit count (1 to 32):
> 24

For a WAN, enter the new LAN IPv4 upstream gateway address.
For a LAN, press <ENTER> for none:
> 

Enter the new LAN IPv6 address.  Press <ENTER> for none:
> 

Do you want to enable the DHCP server on LAN? (y/n) y
Enter the start address of the IPv4 client address range: 172.18.0.10
Enter the end address of the IPv4 client address range: 172.18.0.20
Disabling IPv6 DHCPD...

Do you want to revert to HTTP as the webConfigurator protocol? (y/n) n

Please wait while the changes are saved to LAN...
 Reloading filter...
 Reloading routing configuration...
 DHCPD...

The IPv4 LAN address has been set to 172.18.0.253/24
You can now access the webConfigurator by opening the following URL in your web browser:
                https://172.18.0.253/

Press <ENTER> to continue.
pfSense - Netgate Device ID: 98f0e53206c36b104aff

*** Welcome to pfSense 2.6.0-RELEASE (amd64) on pfSense ***

 WAN (wan)       -> igb0       -> v4: 203.0.113.253/29
 LAN (lan)       -> igb1       -> v4: 172.18.0.253/24

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Enable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 

The TYPO3 backend normally appends the session token ID to the URL as follows: https://example.org/typo3/main?token=<token-id>.